Test now
+49 351 65262-22
In the ADVISIM3D download area, customers with a valid license key will find their current ADVISIM3D software for download and release notes of the current and previous software versions. If you would like to test ADVISIM3D for your application scenario, you can request your personal test license key.
Release Notes
Update
- Updating the license agreement (EULA)
Behobene Fehler
- Relocated project files with blanks in step file path cannot be loaded
- Project files whose step file path no longer exists cannot be loaded
- Project files are not upward compatible. The message when loading project files of newer versions is ambiguous.
New Features
- ADVISIM3D supports custom logos in the print report
- The nozzle catalog has been extended by the following nozzles:
- AWH Tanko S20
- AWH Tanko S40
Improvements
- Simulation properties can be displayed in the print report
- Nozzle data import into the ADVISIM3D online nozzle database was automated
- The following nozzles are imported release-independently for the first time:
- AWH Tanko S30
- Lechler MicroSpinner 2
- Lechler Micro Whirly
- Lechler Pico Whirly
Fixed Bugs
- Black screen when simulating the ablated layer thickness
- Incorrect automatic adjustments of color scale after inserting a torrentcleaner
- High resolution monitors do not present a coordinate system under properties
- On high-resolution monitors, the object properties obscure the coordinate system.
- Parameters start time, end time and duration of a motion have no units
New Features
- ADVISIM3D supports the definition of more than 6 clipping planes, where only 6 can be active at the same time
- ADVISIM3D simulation kernel extended
- Modeling of the transition from non-decayed to the region of a decayed full beam by means of linear fades
Improvements
- ADVISIM3D simulation kernel extended
- Simulation of the ablated layer thickness within of 1 m from all direct hit points
- Help button has been added to the quick start guide and to the header of all dialog windows
- Nozzle selection table can be sorted by all categories
- License information and help are available in the menu bar
Fixed Bugs
- Screenshots and custom views in the print report do not have a time line and thus do not allow any conclusion about the simulation point in time
- Switching custom views does not switch the slice planes
New Features
- ADVISIM3D supports the visualization of nozzle motion paths
- ADVISIM3D simulates motions even in the spray shadow/preview
Improvements
- Added elements are indicated by a small blue dot in the structure tree
Fixed Bugs
- Motions can be deactivated in the simulation results view.
- Deactivated constraints can be activated in the simulation result view. They change the nozzle positions.
New functions
- ADVISIM3D supports rotating motions of individual nozzles
- The following nozzles have been added to the nozzle catalog:
- Spraying Systems - MiniRokon - TankJet D41800E - B3/8A4-13.6-EX
Improvements
- License information is loaded in the background so that ADVISIM3D remains continuously usable
- The spray pattern completely covers the entire working area of the nozzle
- The last simulation settings can be saved for new simulations
Fixed bugs
- Changes to nozzle position with hidden constraints cannot be undone
- If constraints exists and "Create new project" is clicked, "Delete constraint" is displayed in the list of actions that can be undone
- If a nozzle with animation is deleted from the project, the project cannot be simulated afterwards
- In case of a nozzle with motions and constraints, the selection "Change nozzle type" results in the deletion of the motion/constraint
- If the selected model part surface is located behind a section plane, it is not highlighted when "Create constraint to model part surface" is selected
New functions
- ADVISIM3D supports linear motions of individual nozzles
- The nozzle catalog has been extended by the following nozzles:
- AWH - Tanko-S30LF
- Lechler - HygenicWhirly series 594
- Lechler - Flat jet nozzle 660.486.17
- Lechler - Flat fan nozzle 660.567.17
Improvements
- All notification windows have been adapted to the ADVISIM3D corporate design
Fixed Bugs
- Wrong validations when entering values via spider elements
- No possibility to start the license dialog to enter another license when the maximum number of concurrently usable program instances is reached
New functions
- ADVISIM3D supports spray balls with variable spray angles up and down (spray balls).
- The following nozzles have been added to the nozzle catalog:
- AWH - TANKO-JM800-G13
- AWH - TANKO-MX125-G14
- AWH - TANKO-MX150-G12
- AWH - TANKO-MX150-G14
- various sample nozzles for spray balls with variable spray angles
New functions
- Nozzle positioning via angles to the normals of the reference axes
- Linking of nozzle orientation after insertion of a link activated by default
Improvements
- Minimum of the color scale also adjustable in preview
- Shortcut "Ctrl+O" for open project inserted
- Tooltips for window buttons
- Added "Hake nozzles" to nozzle catalog
Fixed bugs
- Color scale minimum jumps when scrolling
- Changing nozzle orientation with constant target leads to unexpected position change
- Deselect nozzle with "ESC
- Installation problems on turkish speaking systems
New features
- ADVISIM3D goes online
- Nozzle can be aligned to a model part axis or to a model part surface
Improvements
- Simulation of the cleaning effect was activated again
- The help is now also available in English
- Properties area switches contextually
Fixed bugs
- Deactivated logging is switched on at the next start
- Distance of the nozzle to the target point is not updated correctly
New Features
- New UX design, including workflow bars, color scheme, layout, dialogs, icons
- Display of license expiration date refers to the remaining license usage period
- 9 more nozzles were published in the database
Improvement
- Quick start guide can be displayed again after each work step
- Hidden nozzles are listed in the print report
Fixed Bugs
- Calculation of the volume flow distribution for full jets is incorrect
New Features
- New user interface; SIMKOR is now called ADVISIM3D
- Conversion of a model part into nozzle possible
- Simulation results can be printed as report
- Nozzle revision: Nozzles are automatically updated when the application is started
Improvement
- Spray image simulation "upwards" of spray balls and surge cleaners is now even more realistic
- Overlay menus for controlling a 3D scene and for the color scale are now movable and always visible
Fixed Bugs
- Color scale cannot be saved as legend with screenshot
It is painful that we have temporarily abandoned the simulation of the cleaning effect, in which we have already invested enormous development efforts. But not everything that is desirable is also feasible and useful, so we have expanded this function for the time being in response to feedback from our test users. The prediction of the cleaning effect is so complex that the simulation would not yet provide realistic results.